Description
HUNTERÂ DB00400
The Hunter is a recreational device and should only be used in temporary installation. Its sturdy steel construction allows you to warm up and cook on top of the unit. Easily transportable on an ATV, it can follow you on each of your hunting or fishing expeditions. The Hunter gives you the autonomy and comfort you need.
- Exclusive to recreational use (ice fishing hut, prospector tent)
- 20″ logs
- 2 ft³ firebox volume
- Shipping weight: 56 pounds
- Possible to cook on top of the appliance
- Proudly made in Quebec
Any installation must be done according to the data and drawings detailed in the owner’s manual.
Fuel type | Dry cordwood |
Recommended heating area(2) | 250 – 1,400 ft² |
Overall firebox volume | 2 ft³ |
Maximum heat output-dry cordwood(1) | 45,000 BTU/h (13.19 kW) |
Size | Small |
Alcove installation approved | No |
Mobile home approved | No |
Overall dimension (Width) | 12 5/8″ |
Overall dimension (Height) | 23 3/8″ |
Overall dimension (Depth) | 22 7/8″ |
Flue outlet diameter | 6″ |
Distance-center of the flue outlet to back unit | 3 3/4″ |
Distance-center of the flue outlet to side unit | 6 1/4″ |
Recommended chimney diameter | 6″ |
Door type | Full steel |
Door opening size (Width) | 9 3/8″ |
Door opening size (Height) | 10 7/8″ |
Steel thickness-body | 14 ga |
Steel thickness-top | 14 ga |
Firebox size (Width) | 12 3/8″ |
Firebox size (Height) | 16 1/8″ |
Firebox size (Depth) | 19 7/8″ |
Log positioning | Loading over depth |
Maximum log length | 20″ |
Baffle type | Steel |
Canadian Standard (safety) | ULC S627 |
Warranty | Limited 1 year to welds |
Shipping weight | 56 lb (25 kg) |
Or3ZCRL9QkiJQmB3TVyCng | |
Clearances to combustibles* |
Canada
|
Single wall pipe                            Double wall pipe | |
Clearance – Side wall | 48″Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 48″ |
---|---|
Clearance – Corner | 48″Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 48″ |
Clearance – Back wall | 48″Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 48″ |
Clearance – Base of the unit to ceiling** | 82 ”                                               82 “ |
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
- 1. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
- 2. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
Reviews
There are no reviews yet.