Description
HT-3000Â DB07300
Ideal for heating spaces up to 2,700 ft², the HT-3000 is a wood stove with an impressive output of 110,000 BTU/h. EPA certified at 1.32 g/h, this non-catalytic appliance represents an eco-responsible heating source. Completely redesigned, the HT-3000 succeeds the HT2000 while retaining its reliability and distinctive look. Its very large combustion chamber allows logs to be loaded across the width and depth.
Included:Â pedestal with ash drawer, ceramic glass, ash lip, air damper
▪ Up to 10 hours burn time
▪ Up to 22″ logs
▪ 3.5 ft³ firebox
▪ Heavy duty 5/16″ steel top reinforced with C-Cast heat shield
▪ Insulated top panel for added durability
▪ EPA certified
▪ Proudly made in Canada
▪ Limited lifetime warranty
▪ Certified for mobile home and alcove installation
Any installation must be done according to the data and drawings detailed in the owner’s manual.
| Fuel type | Dry cordwood (16″ recommended) |
| Recommended heating area(9) | 1,000 – 2,700 ft² |
| Overall firebox volume | 3.5 ft³ |
| EPA loading volume | 2.84 ft³ |
| Maximum burn time(9) | 10 h |
| Maximum heat output-dry cordwood(4) | 110,000 BTU/h (32.2 kW) |
| Minimum overall heat output rate(4)Â (5) | 18,200 BTU/h (5.3 kW) |
| Maximum overall heat output rate(4)Â (5) | 49,500 BTU/h (14.5 kW) |
| Average overall efficiency-dry cordwood (HHV)(5)Â (6) | 71 % |
| Average overall efficiency-dry cordwood (LHV)(5)Â (7) | 76 % |
| Optimum efficiency(1)Â (2) | 77 % |
| Optimum heat transfer efficiency(8) | 76 % |
| Average particulate emission rate(3) | 1.32 g/h |
| Average CO(10) | 92 g/h |
| Size | Extra Large |
| Alcove installation approved | Yes |
| Mobile home approved | Yes, with fresh air intake |
| Certified according to applicable standards | By an accredited laboratory (CAN/USA) |
| Overall dimension (Width) | 28 1/8” |
| Overall dimension (Height) | 36 3/8” |
| Overall dimension (Depth) | 31 1/4” |
| Premium quality blower included (CFM) | Optional |
| Combustion technology | Non-catalytic |
| Stainless-steel secondary-air system | Yes |
| Flue outlet diameter | 6″ |
| Distance-center of the flue outlet to back unit | 9″ |
| Distance-center of the flue outlet to side unit | 14 1/8″ |
| Recommended chimney diameter | 6″ |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height | 12′ |
| Door type | Single, glass with cast iron frame |
| Door opening size (Width) | 19″ |
| Door opening size (Height) | 10 5/8″ |
| Glass type | Ceramic glass |
| Glass surface – W x H | 18 3/8″ x 12 1/8″ |
| Steel thickness-body | 3/16″ |
| Steel thickness-top | 5/16″ |
| Firebox size (Width) | 22 7/8″ |
| Firebox size (Height) | 12 7/8″ |
| Firebox size (Depth) | 20 1/8″ |
| Log positioning | Loading over width and over depth |
| Maximum log length | 22″ |
| Firebox lined with refractory bricks | Yes |
| Baffle type | High quality vermiculite |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA Standard (emissions) | EPA |
| Canadian Standard (safety) | ULC S627 |
| USA Standard (safety) | UL 1482, UL 737 |
| Warranty | Limited lifetime |
| Shipping weight | 525 lb (238 kg) |
| Nr7ibgVJQreHUIrjzH2VTg |
| Clearances to combustibles* |
Canada                   United-States
|
| 14″ | |
| Clearance – Corner | 7 1/4 |
| Clearance – Back wall | 13 1/4″ |
| Clearance – Base of the unit to ceiling** | 84″ |
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
- 1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
- 2. Optimum overall efficiency at a specific burn rate (LHV).
- 3. This appliance is officially tested and certified by an independent agency.
- 4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
- 5. As measured per CSA B415.1-10 stack loss method.
- 6. Higher Heating Value of the fuel.
- 7. Lower Heating Value of the fuel.
- 8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
- 9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
- 10. Carbon monoxyde.
Reviews
There are no reviews yet.